peter_mathys

[peter_mathys]

Dear Maikata329

please use the „Shot Data“ database instead of the ExportShooters.csv. The „Shot Data“ database is normally located in C:\SIUS\SiusData\Data and has the name you entered at startup of SIUSData.

The manual which you can get at Help „?“ in the menu of SIUSData gives you an overview of the format of the „Shot Data“ database. In this database you finde the Inner Tens and much details more.

Regards
Peter Mathys

[peter_mathys]

Dear Maikata329

do you know the „Remote Mode“? With „Remote Mode“ you can reduce the operation at the lane itself. -> See System\Settings\Other\Control Mode in Barcode Library
Note: „Remote Mode“ has also an effect to Barcode Reader and Remote Control.

An other way is to switch off touch function. -> See System\Hardware\Control unit\Touch in Barcode Library
If you switch off touch function, Barcode Reader and Remote Control are still operational.
Barcode Reader can be used with some barcodes printout of Barcode Library, with which the shooter or range officer can adjust position if needed.
Remote Control can be uses with the on screen Remote Control Menu. By default the regular functions are available. Be applying „Short Cut Programs“ you can add the lifter positions to the default. For „Short Cut Programs“ see Download Shortcut with SIUSData in option Video Tutorials of Support page.

Best regards
Peter Mathys

[peter_mathys]

Dear Maikata329

after installation of SIUS Barcode Library there is a short manual at menu „Help“ available.

On our Support page (scroll down a little bit) there’s the option Video Tutorials. In the section „Barcode Library“ there are many short click-video tutorials about the Barcode Library.
Additional all the videos are also available at our YouTube channel.

Regards
Peter Mathys

[peter_mathys]

Dear Maikata329

in SIUSData you have the possibility when you printout targets to select „Target in original size“. The Printout will be then in 1:1 life size.

Note: Please check the printout with a ruler. If there are differences in printout, 100mm on the ruler is not 100mm on the paper you can adjust the scale by adjusting the number „1000“ at „X-Messung“ and „Y-Messung“.
For more details see also SIUSData help topic „Target in original size“.

Best regards
Peter Mathys

[peter_mathys]

Dear Maikata329

is my assumption correct that the positions for your user barcode are not approached automatically as usual in a 3-position competition?

There are tow ways to start a shoot, by selecting „Targets“ or „Program“.
Program are predefined shoots which have addition to the order of competition also some other settings as special printouts, scoring methods and also target lifter positions.
Targets to which also user barcodes belongs have only a target shape. All settings have to be set manually.

If you create a user barcode you have to do the change for each position manually.

Best regards
Peter Mathys

[peter_mathys]

Dear Maikata329

thanks for introduce your club Montgomery Bell Academy.

If the issue you written about appears again, please let us know. Let us know the steps your done before the issue happen. Send the us the competition you select, screenshots, pictures of the range (targets), if SIUSRank was connected the database of it and all other things belogs to the issue.

Send all the information by email to SIUS Support.

Regards
Peter Mathys

[peter_mathys]

Dear Vlado

Let me try to explain to you the current situation

– The ISSF published the new competition formats and is working on finalization of the rules.
– ISSF informs us regularly about the latest decision of the rule refinement process.
– As far as we are concerned, the final version of the new competition formats will be tested at the WC in Cairo and the final version of the rules is expected immediately after the WC in Cairo.

We are developing the changes communicated by ISSF step by step into SIUSRank and all other software parts from SIUS (Scoreboard, Reports, Online-Results, ….)
The release of a useful SIUSRank version with integrated new formats can be done only after the new rules are approved by the ISSF.

Thank you for your understanding. For any further explanations, please, address to the ISSF.

Regards
Peter

• Diese Antwort wurde geändert vor 2 Jahren, 10 Monaten von peter_mathys.

[peter_mathys]

Dear Vlado

please be patient a little longer.

Please see the knowledge base entry „Actual version of SIUSRank„.

Many thanks for your understanding.

Regards
Peter

[peter_mathys]

Dear Mulyadi

your issue sounds like the new rules of ISSF. SIUSRank does not support the the latest rules. Please be patient for the next release of SIUSRank.
See also the knowledge base entry Actual version of SIUSRank.

Regards
Peter

[peter_mathys]

Dear Mulyadi Hasan

please see the knowledge base entry Actual version of SIUSRank.

Regards
Peter

[peter_mathys]

Dear bedri

please see the knowledge base entry Actual version of SIUSRank.

Regards
Peter

[peter_mathys]

Hello lokta

STYX Running Target is a stand alone equipment. There is no support for 10 Lane Command Desk TLCD, nor for STYX Lane Scoreboard, STYX Range Scoreboard or SIUSRank.

Regards
Peter

[peter_mathys]

Hallo bshari

leider ist der Support von SIUSView bereits seit längerem eingestellt.

Beim Wechsel auf die neue Wissensdatenbank wurde damals aus diesem Grund der genannte Artikel nicht übernommen. Da dies bereits eine längere Zeit her ist, sind uns auch die Schritte/Vorgehen zur Anzeige auf dem zweiten Monitor nicht mehr präsent.

Grüsse
Peter

[peter_mathys]

Dear Matt

to illuminate the target / range we recommend LED, CFL or gas discharge lamps.

See also our manuals at our homepage eg. HS10 or LS10.

IMPORTANT
Do not use halogen lamps or electric bulbs. Infrared light could interfere with the system.

Best Regards
Peter

• Diese Antwort wurde geändert vor 3 Jahren von peter_mathys.
• Diese Antwort wurde geändert vor 3 Jahren von peter_mathys.
• Diese Antwort wurde geändert vor 3 Jahren von peter_mathys.

[peter_mathys]

Dear Ilgizar

please contact our sales dept. they will check the possibilities and will take care of your wishes.

Regards
Peter

[Autor]

Beiträge