SiusLane: NOR Luftsprint (3D)

[mteinum]

Hi!

Luftsprint is a norwegian 10m air pistol program defined in section 8.29:

https://www.skyting.no/wp-content/uploads/2020/12/hurtig-nais-luft-ppc-2021.pdf

I’m able to create a fig, trg and exercice file from this specification, but scoring is a problem.

This is my NSF3D.fig definition:

<?xml version=“1.0″ encoding=“utf-8″?>
<Figure>
<Properties>
<Property identifier=“Name“ value=“NSF3D“ type=“System.String, mscorlib“ />
<Property identifier=“Size“ value=“0.17, 0.17″ type=“System.Drawing.SizeF, System.Drawing“ />
</Properties>
<DrawItems>
<DrawItem name=“FilledCircle“ color=“Black“ centerPoint=“0;0″ radius=“0.0380″ />

<DrawItem name=“Circle“ color=“Black“ penWidth=“0.1″ dashStyle=“Solid“ centerPoint=“0;0″ radius=“0.0778″ />
<DrawItem name=“Circle“ color=“Black“ penWidth=“0.1″ dashStyle=“Solid“ centerPoint=“0;0″ radius=“0.0645″ />
<DrawItem name=“Circle“ color=“Black“ penWidth=“0.1″ dashStyle=“Solid“ centerPoint=“0;0″ radius=“0.0513″ />

<DrawItem name=“Circle“ color=“White“ penWidth=“0.1″ dashStyle=“Solid“ centerPoint=“0;0″ radius=“0.0248″ />
<DrawItem name=“Circle“ color=“White“ penWidth=“0.1″ dashStyle=“Solid“ centerPoint=“0;0″ radius=“0.0115″ />
<DrawItem name=“Circle“ color=“White“ penWidth=“0.1″ dashStyle=“Solid“ centerPoint=“0;0″ radius=“0.0058″ />

<DrawItem name=“TextHV“ color=“Black“ font=“Arial“ style=“Regular“ size=“0.006″ position=“0.0711;0.0711″ text=“5″ />
<DrawItem name=“TextHV“ color=“Black“ font=“Arial“ style=“Regular“ size=“0.006″ position=“0.0579;0.0579″ text=“6″ />
<DrawItem name=“TextHV“ color=“Black“ font=“Arial“ style=“Regular“ size=“0.006″ position=“0.0446;0.0446″ text=“7″ />
<DrawItem name=“TextHV“ color=“White“ font=“Arial“ style=“Regular“ size=“0.006″ position=“0.0314;0.0314″ text=“8″ />
<DrawItem name=“TextHV“ color=“White“ font=“Arial“ style=“Regular“ size=“0.006″ position=“0.0181;0.0181″ text=“9″ />
</DrawItems>
</Figure>

And NSF3D.trg:

<?xml version=“1.0″ encoding=“utf-8″?>
<Target name=“10m Pistol Sprintskive“ ident=“1010″>
<Properties>
<Property identifier=“Size“ value=“0.17, 0.17″ type=“System.Drawing.SizeF, System.Drawing“ />
<Property identifier=“InnerTen“ value=“0.0057″ type=“System.Double, mscorlib“/>
<Property identifier=“Caliber“ value=“0.0045″ type=“System.Double, mscorlib“/>
</Properties>
<Groups>
<Group name=“NOR“/>
<Group name=“10m“/>
</Groups>
<Figures>
<Figure name=“NSF3D“ location=“0;0″ scale=“1, 1″ />
</Figures>
<Scorings>
<Scoring name=“xxx“ />
</Scorings>
</Target>

The problem is obvious the Scoring element. I assume that the names are predefined in code.

If there was support for inline rings in the scoring element, this would enable me to create a new target:

<Scoring name=“NOR_10m_Luftsprint“>
<Ring score=“10″ radius=“0.0115″/>
<Ring score=“9″ radius=“0.0248″/>
<Ring score=“8″ radius=“0.0380″/>
<Ring score=“7″ radius=“0.0513″/>
<Ring score=“6″ radius=“0.0645″/>
<Ring score=“5″ radius=“0.0778″/>
</Scoring>

Do you have to create a new release of the software or are there ways to do this in config?

[peter_mathys]

Dear mteinum

your assumption, a new release of SIUSLane is required for a new scoring method, is correct.

If the target is necessary, the easiest way to proceed is that you contact your local representative. He will collect all date we need and place an order for the target here in SIUS.

Best regards
Peter Mathys

[Autor]

Beiträge