ERROR Code 191

ERROR Code 191

Some STYX Network Connectors have Channels that are powered off (devices attached there might not run)

Important

–

Initial installation

Check in SIUSCocpikt\Range Board\STYX Service, if all channels of the Network Connectors are green. If there are some channels of Network Connectors red, switch on the channel by selecting the channel, right mouse click and select “Power ON Channels 1-5”. Additional, check on all Network Connectors the LED, if the are on.

Configured system

If the error code 191 appears with a configured system, check

• whether all channels of every Network Connector is green
• on all Network Connectors the LED, whether they are on

Deutsch