HS10G3 Hybridscore Target
ProductSettings Description

TargetIlluminationBrightnessInPercent

Specifies the target Illumination Brightness in Percent. Default: 10
The target Illumination can be adjusted from 0% – 100% with this setting.

TargetIlluminationTemperature

Color Temperature of the Target Illumination. Default: “Neutral”

The target illumination can be changed between “Cold” (6500K), “Warm” (2700K) and a “Neutral” white value in between. The “Legacy” option reflects a color temperature known from the former LS10G2 target of approximately 3000K.

PaperFeedInM

Defines how long the paper feed motor moves in Meter. Default: 0.02 (2cm)
The Feed of the witness band after each shot can be adjusted with this setting.
Caution: The distance is set in meters!

OverrideMicAmplification

Override the used microphone amplification

If a value other than “Inactive” is selected, the microphone gain is set to the corresponding value.

Supported Amplifications by HS10G3 are:

• Amp184.0
• Amp63.6
• Amp36.9
• Amp27.1
  
• Default is Inactive (used for 10m Installations)
• For 50m Installations it has to be set to: 27.1

OverrideMicTrigger

Override the used microphone voltage threshold to trigger shot detections

If a value other than 0 is set, the trigger levels are calculated based on this setting.
The two TriggerLevels are: 2.5V +- OverrideMicTrigger

• Default is 0 (used for 10m Installations)
• For 50m Installations it has to be set to 1.0

OverrideFrameHitAmplification

Override the used FrameHit microphone amplification

If a value other than “Inactive” is selected, the microphone gain is set to the corresponding value.

• Default is Inactive (used for 10m Installations)
• For 50m Installations it has to be set to: 7.5