No shot display or offline at LS2550 targets 25/50m

No shot display or offline at LS2550 targets 25/50m

If no shots are displayed on 25 or 50m systems with LS2550 targets or if the monitor shows “Offline”, check the following:

1. Checking the blink code of the target (videos available)
   1. If the LED does not flash, continue with item 2
   2. If the LED flashes, continue with item 3
2. Remove the SD card from the target. Support is pleased to provide instructions on how to do it
   1. If the LED flashes after removing the SD card, continue with point 3
   2. If the LED does not flash after removing the SD card, contact support
3. Update the targets with SIUS Cockpit / Range Update
4. If the SD card has been removed, check that the target with SD card starts up again
   1. The LED flashes, the target runs normally: Leave SD card inserted
   2. The LED no longer flashes: remove the SD card again

Note: The SD card is only used to store the logs and can be omitted in this case.