Running target SA 941> RTC 20 > mixed mode

[Mulyadi Hasan]

Dear sius support team.

I have a 10m running target SA941.
The problem is when RTC 20 in mixed was selected.

The target only running in slow mode only, (not random with fast mode?)

Please Need your guidance, how to fix and resolved this issue.

Thank you.

[peter_mathys]

Dear Hasan Mulyadi

to operate running target in mixed mode, you need the cable KP019 between the RTC20 and the monitor electronic ME921. The KP019 is a date cable equipped with two 8 pin male DIN connector on both side additional to the power cable.

On the RTC20 at the switch, “Mixed” is to select.

At the control unit CU921 is the program Mixed (e.g. 40mx) to select.

If this not help, please contact SIUS Support by email. Send pictures of the range and as may information you have.

Best regards
Peter

[Author]

Posts