Hi,
there is a small logical error on the SIUS range control device when running events and operating time control from the device. For example during finals in single shot events, when the timer runs out and you want to send the same time to the targets/screens, the start button is not activated. This is a small problem usually, but 50 seconds per shot time can run out quite easily.
The current solution that I have found is to change the time to an arbitrary value on the screens, then reset it to the desired value.
Testing this can be done very easily, set the timer to 5 seconds, let the timer run out and try to set the timer again. the green start button on the device is not active and will not be active unless you chgange the time.
.
